[IMP] hw_telium_payment_terminal: README file instead of description

5 years ago · e802e41989
2 changed files with 48 additions and 53 deletions
--- a/hw_telium_payment_terminal/README.rst
+++ b/hw_telium_payment_terminal/README.rst
@ -0,0 +1,48 @@
 Hardware Telium Payment Terminal
 ================================
 This module adds support for credit card reader and checks printers
 using Telium protocol in the Point of Sale. This module is designed to
 be installed on the *POSbox* (i.e. the proxy on which the USB devices
 are connected) and not on the main Odoo server. On the main Odoo server,
 you should install the module *pos_payment_terminal*.
 The configuration of the hardware is done in the configuration file of
 the Odoo server of the POSbox. You should add the following entries in
 the configuration file:
 * payment_terminal_device_name (default = /dev/ttyACM0)
 * payment_terminal_device_rate (default = 9600)
 The Telium protocol is used by Ingenico and Sagem payment terminals. It
 is based on the Concert protocol, so it can probably work with payment
 terminals from other brands. This module implements the protocol E+ (and
 not the protocol E), so it requires a Telium Manager version 37783600
 or superior. To get the version of the Telium Manager on an Ingenico
 terminal press F > 0-TELIUM MANAGER > 2-Consultation > 4-Configuration
 > 2-Software > 1-TERMINAL > On Display > Telium Manager and then read
 the field *M20S*.
 You will need to configure your payment terminal to accept commands
 from the POS. On an Ingenico terminal press F > 0-TELIUM MANAGER >
 5-Initialization > 1-Parameters > Cash Connection and then select *On*
 and then *USB*. After that, you should reboot the terminal.
 This module has been successfully tested with:
 * Ingenico EFTSmart4S
 * Ingenico EFTSmart2 2640 with Telim Manager version 37784503
 * Ingenico iCT220
 * Ingenico iCT250
 * Ingenico i2200 cheque reader and writer
 This module requires the Python library *pycountry* version >= 16.11.08.
 To install it, run:
 ``sudo pip install pycountry``
 This module has been developped during a POS code sprint at Akretion
 France from July 7th to July 10th 2014. This module is part of the POS
 project of the Odoo Community Association http://odoo-community.org/.
 You are invited to become a member and/or get involved in the
 Association !
--- a/hw_telium_payment_terminal/openerp.py
+++ b/hw_telium_payment_terminal/openerp.py
@ -27,59 +27,6 @@
    'category': 'Hardware Drivers',
    'license': 'AGPL-3',
    'summary': 'Adds support for Payment Terminals using Telium protocol',
    'description': """
 Hardware Telium Payment Terminal
 ================================
 This module adds support for credit card reader and checks printers
 using Telium protocol in the Point of Sale. This module is designed to
 be installed on the *POSbox* (i.e. the proxy on which the USB devices
 are connected) and not on the main Odoo server. On the main Odoo server,
 you should install the module *pos_payment_terminal*.
 The configuration of the hardware is done in the configuration file of
 the Odoo server of the POSbox. You should add the following entries in
 the configuration file:
 * payment_terminal_device_name (default = /dev/ttyACM0)
 * payment_terminal_device_rate (default = 9600)
 The Telium protocol is used by Ingenico and Sagem payment terminals. It
 is based on the Concert protocol, so it can probably work with payment
 terminals from other brands. This module implements the protocol E+ (and
 not the protocol E), so it requires a Telium Manager version 37783600
 or superior. To get the version of the Telium Manager on an Ingenico
 terminal press F > 0-TELIUM MANAGER > 2-Consultation > 4-Configuration
 > 2-Software > 1-TERMINAL > On Display > Telium Manager and then read
 the field *M20S*.
 You will need to configure your payment terminal to accept commands
 from the POS. On an Ingenico terminal press F > 0-TELIUM MANAGER >
 5-Initialization > 1-Parameters > Cash Connection and then select *On*
 and then *USB*. After that, you should reboot the terminal.
 This module has been successfully tested with:
 * Ingenico EFTSmart4S
 * Ingenico EFTSmart2 2640 with Telim Manager version 37784503
 * Ingenico iCT220
 * Ingenico iCT250
 * Ingenico i2200 cheque reader and writer
 This module requires the Python library *pycountry* version >= 16.11.08.
 To install it, run:
 sudo pip install pycountry
 This module has been developped during a POS code sprint at Akretion
 France from July 7th to July 10th 2014. This module is part of the POS
 project of the Odoo Community Association http://odoo-community.org/.
 You are invited to become a member and/or get involved in the
 Association !
 This module has been written by Alexis de Lattre
 <alexis.delattre@akretion.com> from Akretion.
    """,
    'author': "Akretion,Odoo Community Association (OCA)",
    'website': 'http://www.akretion.com',
    'depends': ['hw_proxy'],