[IMP] hw_telium_payment_terminal: README file instead of description

hw_telium_payment_terminal/README.rst

@@ -0,0 +1,48 @@
+Hardware Telium Payment Terminal
+================================
+
+This module adds support for credit card reader and checks printers
+using Telium protocol in the Point of Sale. This module is designed to
+be installed on the *POSbox* (i.e. the proxy on which the USB devices
+are connected) and not on the main Odoo server. On the main Odoo server,
+you should install the module *pos_payment_terminal*.
+
+The configuration of the hardware is done in the configuration file of
+the Odoo server of the POSbox. You should add the following entries in
+the configuration file:
+
+* payment_terminal_device_name (default = /dev/ttyACM0)
+* payment_terminal_device_rate (default = 9600)
+
+The Telium protocol is used by Ingenico and Sagem payment terminals. It
+is based on the Concert protocol, so it can probably work with payment
+terminals from other brands. This module implements the protocol E+ (and
+not the protocol E), so it requires a Telium Manager version 37783600
+or superior. To get the version of the Telium Manager on an Ingenico
+terminal press F > 0-TELIUM MANAGER > 2-Consultation > 4-Configuration
+> 2-Software > 1-TERMINAL > On Display > Telium Manager and then read
+the field *M20S*.
+
+You will need to configure your payment terminal to accept commands
+from the POS. On an Ingenico terminal press F > 0-TELIUM MANAGER >
+5-Initialization > 1-Parameters > Cash Connection and then select *On*
+and then *USB*. After that, you should reboot the terminal.
+
+This module has been successfully tested with:
+
+* Ingenico EFTSmart4S
+* Ingenico EFTSmart2 2640 with Telim Manager version 37784503
+* Ingenico iCT220
+* Ingenico iCT250
+* Ingenico i2200 cheque reader and writer
+
+This module requires the Python library *pycountry* version >= 16.11.08.
+To install it, run:
+
+``sudo pip install pycountry``
+
+This module has been developped during a POS code sprint at Akretion
+France from July 7th to July 10th 2014. This module is part of the POS
+project of the Odoo Community Association http://odoo-community.org/.
+You are invited to become a member and/or get involved in the
+Association !

hw_telium_payment_terminal/__openerp__.py

@@ -27,59 +27,6 @@
     'category': 'Hardware Drivers',
     'license': 'AGPL-3',
     'summary': 'Adds support for Payment Terminals using Telium protocol',
-    'description': """
-Hardware Telium Payment Terminal
-================================
-
-This module adds support for credit card reader and checks printers
-using Telium protocol in the Point of Sale. This module is designed to
-be installed on the *POSbox* (i.e. the proxy on which the USB devices
-are connected) and not on the main Odoo server. On the main Odoo server,
-you should install the module *pos_payment_terminal*.
-
-The configuration of the hardware is done in the configuration file of
-the Odoo server of the POSbox. You should add the following entries in
-the configuration file:
-
-* payment_terminal_device_name (default = /dev/ttyACM0)
-* payment_terminal_device_rate (default = 9600)
-
-The Telium protocol is used by Ingenico and Sagem payment terminals. It
-is based on the Concert protocol, so it can probably work with payment
-terminals from other brands. This module implements the protocol E+ (and
-not the protocol E), so it requires a Telium Manager version 37783600
-or superior. To get the version of the Telium Manager on an Ingenico
-terminal press F > 0-TELIUM MANAGER > 2-Consultation > 4-Configuration
-> 2-Software > 1-TERMINAL > On Display > Telium Manager and then read
-the field *M20S*.
-
-You will need to configure your payment terminal to accept commands
-from the POS. On an Ingenico terminal press F > 0-TELIUM MANAGER >
-5-Initialization > 1-Parameters > Cash Connection and then select *On*
-and then *USB*. After that, you should reboot the terminal.
-
-This module has been successfully tested with:
-
-* Ingenico EFTSmart4S
-* Ingenico EFTSmart2 2640 with Telim Manager version 37784503
-* Ingenico iCT220
-* Ingenico iCT250
-* Ingenico i2200 cheque reader and writer
-
-This module requires the Python library *pycountry* version >= 16.11.08.
-To install it, run:
-
-sudo pip install pycountry
-
-This module has been developped during a POS code sprint at Akretion
-France from July 7th to July 10th 2014. This module is part of the POS
-project of the Odoo Community Association http://odoo-community.org/.
-You are invited to become a member and/or get involved in the
-Association !
-
-This module has been written by Alexis de Lattre
-<alexis.delattre@akretion.com> from Akretion.
-    """,
     'author': "Akretion,Odoo Community Association (OCA)",
     'website': 'http://www.akretion.com',
     'depends': ['hw_proxy'],